Contents
- STARGRASP Info-Sheet
- STARGRASP Quick Start
- STARGRASP Core System
- I. Core System Operation
- A. Quick Start
- B. Performance
- II. Core Software Overview
- Command Syntax Notes
- Application Notes
- A. Demo Scripts
- config
- functions
- stage2
- pon
- cal
- setup
- clean
- expose
- readout
- save
- video
- B. Toolkit Level
- grasp_receiver
- grasp_boot
- grasp_cmd
- grasp_save
- grasp_save_ota
- grasp_pon_ota
- C. STARGRASP C Libraries
- libcli.a
- libsockio.a
- libfh.a
- libcatp.a
- libstargrasp.a
- D. Controller Socket Commands
- adc
- celldes
- cellsel
- clean
- clk
- clvset
- console
- dac
- detsize
- dev
- etime
- etype
- expose
- exposing
- ifconfig
- leds
- ntp
- ot
- otacal
- pixtype
- reset
- readcal
- readout
- settrig
- shutter
- E. Registers and Clocking Instructions
- III. Core Hardware Overview
- A. Cryogenic Assemblies
- Rigidflex
- B. Cryostat Mounted Assemblies
- Chassis
- PREAMP
- DAQ3U
- FPGA
- PowerDist pcb
- Mounting plate
- Minipwrshutter
- C. Power Supplies
- IV. Computers and Switches
- V. Test Procedures
- Extra Software Provided (Unsupported)
- Status Server
- Log System
- FITS Data Store
- otatool
- fitspipe
- noisetone
- controller NTP client
- controller event timestamping
The Quick-Start Section described the minimum steps required to connect the hardware, build the software, and operate a CCD.
See the Performance discussion on STARGRASP v1 controller clocking, sampling, and pixel data transfer.
TODO: This section needs to provide more information on what specifically happens when operating a CCD.